Several Specifics Regarding Safety Vests

<a href="" target='_blank'>safety vest</a> are an important piece of equipment for construction workers, but are often overlooked and under appreciated. Focus always seems to fall to hard hats, goggles, and steel toed boots. However, vests not only protect workers from debris, but make them visible to cars, especially at night when visibility in regular clothes is only about 250 feet. The following article will take a look at their high importance and give some general information about them. <br><br>Kinds of Material <br><br>There are three basic types of material that can be used, all of which have different advantages. Polyester is the most common, as it is thick but lightweight, making it a good choice for most circumstances. Vinyl is another possible option. It is more reflective and more resistant to bad weather, so it may be a better choice for night workers or rainy climates. A third type of material is mesh. These are mainly used in the summertime, or in exceedingly warm climates, as they allow the most airflow to prevent a worker from overheating. These materials are also offered for other protective gear, such as lime t-shirt. <br><br>Color and Reflective Material <br><br>The color seen most often almost everywhere is bright orange. But they do not have to be this color. It is possible to choose something different like bright yellow or neon green in order to be certain workers can be distinguished from other traffic equipment such as road signs, which are all orange. Reflective material is not mandatory unless a crew is working after dark, in which case it can either be built into the material or an LED light can be attached. <br><br>Obtaining Safety Certifications <br><br>There are many institutes that are responsible for certifying safety vests. The first is ANSI. This is the American National Standards Institute, and it provides your most basic, general recommendations. ANSI works side by side with ISEA, the International Safety Equipment Association to develop these standards. OSHA is also important. This is the Occupational Safety and Health Administration. They look at ANSI recommendations and clarify them even further for more specific situations. However, the final authority falls under the FHWA, or Federal Highway Administration. This group gives the final approval on all equipment, declaring it safe for use. <br><br>Classifications <br><br>Not all types of vests are equally protective. They are divided into three classes, depending on the kind of work you will be doing. Class one is the least protective, and is only deemed safe for work done completely off roadways. These are not certified by ANSI because they cannot be used on the road. Class two is a medium grade protection. It is allowed for low traffic areas and places where traffic travels less than 25 mph. These are sometimes certified, but only with the above limitations. Class three is the most protective gear. These are approved for use along highways, busy streets, and anywhere considered particularly hazardous to work in. These are the most common kind used by workers and must be certified. <br><br>It is clear that safety vests should not just be glanced over. They are just as important as any other piece of gear, and require just as much effort to select the right one for the job. Another viable option for safety is the <a href="" target='_blank'>lime t-shirt</a>, which are also proven to be successful.

Lime Hi-Viz Reflective Safety T Shirt

Buy it here: Hi Visibility Safety T-Shirts and Safety Vests. Orange or Lime Yellow ANSI certified hi-viz t-shirts.

Share and Enjoy:
  • Print
  • Digg
  • StumbleUpon
  • Facebook
  • Yahoo! Buzz
  • Twitter
  • Google Bookmarks
  • Add to favorites

Leave a Reply

Spam protection by WP Captcha-Free